MARMITEK INVISIBLE CONTROL 6 INFRARED REMOTE CONTROL EXTENDER

INCLUDES EXTRA SMALL IR RECEIVER FOR DISCRETE OPERATION OF YOUR EQUIPMENT

The Marmitek Invisible Control 6 allows you to use your existing infrared (IR) remote controls to control up to six audio-visual devices which are located behind closed cabinet doors or in other concealed locations.

The Invisible Control works with 99% of IR equipment. Please note that the Invisible Control does not work with IrDA signals used by some UK cable set-top boxes or the higher frequency infrared signals used by Bang and Olufsen equipment. It is not compatible with hi-fi systems that are controlled using remote controls that transmit radio frequencies (e.g. some Bose systems).

Key Features:

• Operate your A/V equipment even through closed cupboard doors
• Operate your A/V devices with ease without having to have them in view (max. 6)
• Works with almost all brands and models and is also suitable for new IR code formats (such as RC-MM) which are used in many new HD devices and digital TV decoders
• Incorporates new IR filter techniques for use in the vicinity of Flat Screen TVs (Plasma, LCD and LED), indirect sunlight and energy-efficient light bulbs
• With the exception of the very small IR receiver, the complete set can be located completely out of sight
• Works on USB mains power (adapter included) or can be connected to a free USB port on one of your A/V devices
• Compatible with all digital TV providers in Europe, like BT Vision, Freesat, Freeview, Sky TV, Sky+, Sky HD and Virgin

How does the Invisible Control Control 6 work?
Locate your A/V device in a closed cabinet or TV unit. The IR receiver must be located in view of your remote control. Stick the IR LEDs on the front panel of your A/V equipment and then hide the IR main module. Point the remote control towards the small IR receiver in order to send the desired command (via the IR module) to the IR LEDs; these will then send on this infrared command to the A/V equipment.

Box Contents:

• 1 x Invisible Control 6 Module
• 1 x IR Receiver Cable
• 2 x IR Extender Cable with 3 IR LED's (eyes)
• 1 x Energy Saving Switched Mode Power Supply Power
• 1 x User Manual (English / Deutsch / Francais / Espanol / Nederlands)

Technical Information:

IR Module

• Power: 100-240V AC 50/60Hz mini USB (included)
• IR LEDs connections: 2 x 2.5mm jack (mono)
• IR Receiver connection: 1 x 3.5mm jack (mono)
• Dimensions: 80 x 43 x 19 mm

IR Receiver

• Frequency range: 30-60 KHz
• IR reception range: ± 10 metres
• Length of cable: 3 metres
• IR reception angle: 60° (+30°/-30° from centre)
• Dimensions receiver block: 15 x 30 x11 mm

IR Extension Cable

• IR LEDs: 2 x IR extender cables with 3 LED's
• Length of cable: 1 - 2 metres (from plug to division 1m, from division to LED 1m)