TECHNISAT TECHNISWITCH 5/8 G2 MULTISWITCH

The TechniSat TechniSwitch 5/8 G2 is a brand-new product in the Technisat IF Distribution range.

It has four Satellite IF-Inputs for analogue and/or digital polarities and a terrestrial aerial input for the complete frequency range of 47 to 862 MHz.

The terrestrial input is supported by slope amplifiers that minimize the loss of these frequencies to maximum -4 dB at 47 MHz up to -1 dB at 862 MHz. The satellite range is also supported with internal amplifiers that even give a gain of +3 dB to the high frequencies up to 2150 MHz. Thus, the slope of the coaxial cables is automatically compensated.

Key Features:

• For distribution of one satellite position
• Up to 24 subscribers can be connected
• For connecting a Quattro LNB
• Up to 100 m distribution length due to inclination compensation
• Energy saving - no mains adapter required for operation
• No attenuation in satellite range

With its very small dimensions, which are 170 mm x 125 mm x 35 mm (WxHxD), this device supports easy installation anywhere within a building. The TechniSwitch 5/8 G can even be operated without any additional power supply, or connection to 220/230 V AC mains. Therefore, even if there is no electric power socket at the location of the multiswitch, the system works as soon as long as there is a receiver connected and switched on. Only one receiver in operation is enough to supply the DC voltage to the switch and the LNBF, including the internal RF and IF amplifiers. If there is a demand for continued operation of the RF amplification, independently from any receivers, (maybe a CATV signal should be available when all connected receivers are switched off) then an external power supply can be used which is already included.

The TechniSat TechniSwitch 5/8 G2 is also both HDTV and UHD ready.

Technical Specification: