TECHNOMATE TM-RF HD HDMI TO RF DVB-T MODULATOR

CONVERT HDMI SIGNAL INTO A HIGH DEFINITION DIGITAL TERRESTRIAL CHANNEL

SEND SKY HD, VIRGIN OR CCTV AS A TUNABLE FULL HD CHANNEL ON YOUR DIGITAL TV

With the Technomate TM-RF HD connect any HDMI device such as a satellite receiver (e.g Sky HD, Virgin Box), CCTV system, Blu-Ray player etc. and watch it in Full HD 1080p over a coaxial RF system. The channel produced appears in the digital terrestrial channel listing along with the other TV channels.You can also watch on other televisions using a passive splitter or amplifier sold separately and explained further below*.

Key Features:

• HDMI DVB-T RF Modulator
• Send 1080p High-Definition video quality with audio over an RF distribution system
• Converts an HDMI digital and Composite signal into an HD digital Freeview DVB-T compatible signal
• Cascadable
• Automatic EDID & HDCP Communication

If you already have an existing Standard Definition RF distribution system but your device is in High-Definition, just change your existing RF modulator to this and watch in High-Definition 1080p on a DVB-T or DVB-T2 compatible TV. The cabling is exactly the same. The TM-RF HD can also be cascaded with multiple modulators  so you can watch different devices on different televisions. Such as CCTV on TV1, Satellite on TV2, etc.

All settings are controlled via the onboard menu screen and buttons. Automatic HDCP and EDID management continuously monitors communication between connected devices.

*Depending on the lengths of coaxial RG6 cables used, a passive splitter up to 8 outputs for up to 8 televisions can be used. Powered amplifiers/splitters can also be used as well as bypass models which can send IR Infra-Red remote control signals, however, an attenuator may be required (attenuators decrease signal db) as powered amplifiers increase a signal strength.

Setup Example