Installation Aids/Tools

Designed to cover damaged brickwork where a cable enters or exits the exterior of a building. Installed with screws or by gluing into position with silicone sealant. The plate protects the cable from...

Designed to cover damaged brickwork where a cable enters or exits the exterior of a building. Installed with screws or by gluing into position with silicone sealant. The plate protects the cable from...

In case you were wondering, the F Connector goes on the end of your LNB cable allowing you to connect it to your receiver. Easy to fit, they just twist onto the end of the satellite cable. F...

Narrow style twist on type screw F connector for Sky Plus Twin WF65 cable.

Simple but effective Female/Female adaptor for linking together two standard satellite cables terminated with Male F connectors.

Allows quick and easy connection of the LNB cable to the back of your receiver, simply push-on or pull-off

OPTICAL CLEANING BOX The Fibre Cleaning Box is easy to operate with lightweight design. The tool can be reused and wipe more than 550 times, clean the LC, SC, FC and ST connectors of any oil, dust...

IDC NETWORK & TELEPHONE CABLE INSERTION TOOL FOR IDC SOCKETS Low cost tool for inserting network and telephone cable in to IDC socket/connectors. Designed for inserting cables into IDC sockets...

An in-line amplifier will boost your signal 20dB, providing a clearer picture. We strongly recommend this device for cable runs over 35 metres. Specification: 16-20db sloped

MAXSAT OMNI COMPASS Alignment of your satellite dish is made that much easier if you have an idea of the direction of the satellite you wish to receive. This device will save you time in locating the...

MAXVIEW CABLE ENTRY COVER The Cable Entry Cover provides a permanent external weatherproof entry point into any mobile vehicle. Features & Specification: Requires wet seal (silicone sealant or...

The Omnisat Digital Satellite Compass Quickly align your dish with this compact Digital Satellite Compass. It's quick and easy to use and has an LCD backlit display. To receive a clear picture, the...

MINI INCLINOMETER ANGLE FINDER WITH MAGNETIC BASE General purpose inclinometer / angle finder with magnetic base, often used with satellite installations but can be utilised in many applications...

A high quality Unifix raw bolt size M8 with a 60mm thread, supplied with corresponding 10mm nylon wall plug. These quality bolts are essential for a solid dish installation. Suitable for use with...

Pack of 4 high quality Unifix raw bolts size M8 with a 60mm thread, supplied with corresponding 10mm nylon wall plug. These quality bolts are essential for a solid dish installation. Suitable for use...

UPDATED VERSION! SAC NS-1620 V2 PROFESSIONAL INCLINOMETER + COMPASS SURVEY TOOL Compass/Inclinometer Site Survey tool is professional, rugged and easy to use. Today every installer must be able to...