STAB MINI POSITIONER DISEQC ROTOR-CONTROL MP01

The Stab DiSEqC 1.2 Mini-Rotor Control Positioner MP01 is the perfect tool for a reliable DiSEqC installation.

Easy to use, the MP01 enables the a DiSEqC motorised dish to be perfectly aligned with just the help of a field strength meter.

Use it as a "Rotor control” when connected to the cable between the motor and the receiver. The MP01 is a DiSEqC 1.2 command generator for turning the motor east and west, fed directly from the receiver.

The 'Zero' function is of particular importance, which allows the motor to return perfectly aligned to zero at any moment when the MP01 is permanently installed near the receiver and when the user is not very familiar with the OSD of the receiver.

• Original STAB-USALS Product
• 3 buttons can send the motor to east, west or zero
• 2 year warranty
• Fits in-line
• Useful installation tool

The "Mini-Positioner" can be used in conjunction with ALL modern-day satellite receivers to enable control of ANY Motor/Rotor which uses DiSEqC. DiSEqC = Digital Satellite Equipment Control is the worldwide protocol for controlling satellite equipment through the single Signal connection to the Satellite dish.

The MP01 has three commands - MOVE EAST - MOVE WEST and Go to "0" Go to zero does two things sending the motor/rotor to the central position & in the CASE of then STAB HH90 HH100 and HH120 'Rotorsats' it also resets those motor/rotors.

Using the MP01 you can test any DiSEqC 1.2 Protocol Motor and you can reset USALS Motors and drive both types of Motor east or west (the rotor/motor stops when you release).

Technical Specification:

• Power Supply: 13/18Vcc
• Consumption in Standby Mode: 5mA
• Consumption in Operating Mode: 15mA
• Attenuation: < 6dB
• Operating Mode: Completely Transparent
• Operating Protocol: DiSEqC 1.0
• Generated Commands: DiSEqC 1.2
• Connection: F Connector
• Dimensions: 32 x 74 x 30 mm
• Weight: 120 grms